Map-Reduce辅导、Programming留学生讲解、辅导c/c++，Python语言、Java讲解
- 首页 >> 其他 Assignment 1: Basics and Map-Reduce
Formative, Weight (10%), Learning objectives (1, 2, 3),
Abstraction (4), Design (4), Communication (4), Data (5), Programming (5)
Due date: 17 : 59pm, 30 March, 2019, Weight: 15% of the course
1 Overview
Assignments should be done in groups consisting of TWO students. If you have
problems finding a group partner use the forum to search for group partners or
contact the lecturer.
2 Assignment
Exercise 1 Suspected Pairs (10 points)
Using the information from the first lecture (or Section 1.2.3 in the textbook),
what would be the number of suspected pairs if the following changes were made
to the data (all changes should be applied at once).
1. The number of days of observation was raised to 5000.
2. The number of people observed was raised to 5 billion (and there were
therefore 500, 000 hotels).
3. We only reported a pair as suspect if they were at the same hotel at the
same time on four different days.
Exercise 2 Hadoop (10+10 points)
For this exercise, you have to set up and configure your system to use Hadoop.
Follow the instructions in Stanford document at http://snap.stanford.edu/
class/cs246-2017/homeworks/hw0/tutorialv3.pdf and set up the virtual
machine as described in Section 1. Run the example program of Section 2
and carry out the different steps given in that section.
The number of days of observation was raised to 5000.
1COMP SCI 3306, COMP SCI 7306 Mining Big Data Semester 1, 2019
Run your job on the file http://www.gutenberg.org/files/100/100-0.
txt in standalone mode and pseudo-distributed mode and record the output.
Exercise 3 Friend Recommendation System (Stanford) (35 points)
Write a MapReduce program in Hadoop that implements a simple People You
Might Know social network friendship recommendation algorithm. The key idea
is that if two people have a lot of mutual friends, then the system should recommend
that they connect with each other. You have to run the program on
the system setup in Exercise 2 in order to receive points for this exercise.
Input: Download the input file from the link: http://snap.stanford.edu/
class/cs246-data/hw1q1.zip. The input file contains the adjacency list and
has multiple lines in the following format:
Here, is a unique integer ID corresponding to a unique user and
is a comma separated list of unique IDs corresponding to the friends
of the user with the unique ID. Note that the friendships are mutual
(i.e., edges are undirected): if A is friend with B then B is also friend with
A. Algorithm: Let us use a simple algorithm such that, for each user U, the
algorithm recommends N = 10 users who are not already friends with U, but
have the most number of mutual friends in common with U.
Output: The output should contain one line per user in the following format:
where is a unique ID corresponding to a user and
is a comma separated list of unique IDs corresponding to the algorithms recommendation
of people that might know, ordered in decreasing number
of mutual friends. Even if a user has less than 10 second-degree friends, output
all of them in decreasing order of the num- ber of mutual friends. If there are
recommended users with the same number of mutual friends, then output those
user IDs in numerically ascending order. Also, please provide a description of
how you are going to use MapReduce jobs to solve this problem. Do not write
more than 3 to 4 sentences for this: we only want a very high-level description of
your strategy to tackle this problem. Note: It is possible to solve this question
with a single MapReduce job. But if your solution requires multiple map reduce
jobs, then that is fine too.
For your submission
Include your source code
2COMP SCI 3306, COMP SCI 7306 Mining Big Data Semester 1, 2019
Include in your writeup a short paragraph describing your algorithm to
tackle this problem.
Include in your writeup the recommendations for the users with following
user IDs: 924, 8941, 8942, 9019, 9020, 9021, 9022, 9990, 9992, 9993.
Exercise 4 MapReduce (15 points)
This exercise has 4 parts. In this exercise, you will be writing and implementing
two MapReduce programs. Both are a bit challenging, but they will help
you to have a better understanding about the MapReduce implementation. After
you write the programs, you will need to answer some questions about them.
Remember that neither problem is case sensitive, so transform words to lowercase
or uppercase. Also remember to use the StringTokenizer to find the correct
answers.
Part 1: Write a program that processes the FirstInputFile http://www.gutenberg.
org/cache/epub/100/pg100.txt and the SecondInputFile http://www.gutenberg.
org/files/3399/3399.txt. This program should count the number of words
with a specific amount of letters in these files - for example, the number of words
with 4 letters, 5 letters and so on. If one word is repeated 20 times in the text,
count it individually 20 times.
Part 2: Answer Questions 1-6.
Q1: How many words are there with length 10 in FirstInputFile?
Q2: How many words are there with length 4 in FirstInputFile?
Q3: What is the longest length between words and what is its frequency
in FirstInputFile?
Q4: How many words are there with length 2 in SecondInputFile?
Q5: How many words are there with length 5 in SecondInputFile?
Q6: What is the most frequent length and what is its frequency in SecondInputFile?
Part 3: Write a second program that again processes the FirstInputFile http:
//www.gutenberg.org/cache/epub/100/pg100.txt and the SecondInputFile
http://www.gutenberg.org/files/3399/3399.txt. However, in addition to
counting the number of words with a specific amount of letters, if one word is
repeated several times, count it only once. So, your output should be the frequency
of words with same length, but count a repeated word only once. Note:
You may need to use 2 MapReduce jobs.
Part 4: Answer Questions 7-12.
3COMP SCI 3306, COMP SCI 7306 Mining Big Data Semester 1, 2019
Q7: How many words are there with length 10 in FirstInputFile?
Q8: How many words are there with length 4 in FirstInputFile?
Q9: What is the most frequent length and what is its frequency in FirstInputFile?
Q10: How many words are there with length 5 in SecondInputFile?
Q11: How many words are there with length 2 in SecondInputFile?
Q12: What is the second-most frequent length and what is its frequency
in SecondInputFile?
Exercise 5 Summary of 2.4 and 2.5 (10 +10 points) (Postgraduate Students
(COMP SCI 7306) only)
For this exercise you have to read Section 2.3.9-2.3.11, 2.4, and 2.5 in Leskovec,
Rajara- man, Ullman (second edition, 2014).
Summarize the content of 2.4 in your own words (600 words).
Summarize the content of 2.5 in your own words (600 words).
3 Procedure for handing in the assignment
Work should be handed in using Canvas. The submission should include:
PDF file of your solutions for theoretical assignments.
all source files
descriptions as required in the statement of the exercises
Hadoop outputs for the exercises
a README.txt file containing instructions to run the code, the two group
members’ names, student numbers, and email addresses of the group members,
only one submission per group.
4
Formative, Weight (10%), Learning objectives (1, 2, 3),
Abstraction (4), Design (4), Communication (4), Data (5), Programming (5)
Due date: 17 : 59pm, 30 March, 2019, Weight: 15% of the course
1 Overview
Assignments should be done in groups consisting of TWO students. If you have
problems finding a group partner use the forum to search for group partners or
contact the lecturer.
2 Assignment
Exercise 1 Suspected Pairs (10 points)
Using the information from the first lecture (or Section 1.2.3 in the textbook),
what would be the number of suspected pairs if the following changes were made
to the data (all changes should be applied at once).
1. The number of days of observation was raised to 5000.
2. The number of people observed was raised to 5 billion (and there were
therefore 500, 000 hotels).
3. We only reported a pair as suspect if they were at the same hotel at the
same time on four different days.
Exercise 2 Hadoop (10+10 points)
For this exercise, you have to set up and configure your system to use Hadoop.
Follow the instructions in Stanford document at http://snap.stanford.edu/
class/cs246-2017/homeworks/hw0/tutorialv3.pdf and set up the virtual
machine as described in Section 1. Run the example program of Section 2
and carry out the different steps given in that section.
The number of days of observation was raised to 5000.
1COMP SCI 3306, COMP SCI 7306 Mining Big Data Semester 1, 2019
Run your job on the file http://www.gutenberg.org/files/100/100-0.
txt in standalone mode and pseudo-distributed mode and record the output.
Exercise 3 Friend Recommendation System (Stanford) (35 points)
Write a MapReduce program in Hadoop that implements a simple People You
Might Know social network friendship recommendation algorithm. The key idea
is that if two people have a lot of mutual friends, then the system should recommend
that they connect with each other. You have to run the program on
the system setup in Exercise 2 in order to receive points for this exercise.
Input: Download the input file from the link: http://snap.stanford.edu/
class/cs246-data/hw1q1.zip. The input file contains the adjacency list and
has multiple lines in the following format:
Here,
of the user with the unique ID
(i.e., edges are undirected): if A is friend with B then B is also friend with
A. Algorithm: Let us use a simple algorithm such that, for each user U, the
algorithm recommends N = 10 users who are not already friends with U, but
have the most number of mutual friends in common with U.
Output: The output should contain one line per user in the following format:
where
is a comma separated list of unique IDs corresponding to the algorithms recommendation
of people that
of mutual friends. Even if a user has less than 10 second-degree friends, output
all of them in decreasing order of the num- ber of mutual friends. If there are
recommended users with the same number of mutual friends, then output those
user IDs in numerically ascending order. Also, please provide a description of
how you are going to use MapReduce jobs to solve this problem. Do not write
more than 3 to 4 sentences for this: we only want a very high-level description of
your strategy to tackle this problem. Note: It is possible to solve this question
with a single MapReduce job. But if your solution requires multiple map reduce
jobs, then that is fine too.
For your submission
Include your source code
2COMP SCI 3306, COMP SCI 7306 Mining Big Data Semester 1, 2019
Include in your writeup a short paragraph describing your algorithm to
tackle this problem.
Include in your writeup the recommendations for the users with following
user IDs: 924, 8941, 8942, 9019, 9020, 9021, 9022, 9990, 9992, 9993.
Exercise 4 MapReduce (15 points)
This exercise has 4 parts. In this exercise, you will be writing and implementing
two MapReduce programs. Both are a bit challenging, but they will help
you to have a better understanding about the MapReduce implementation. After
you write the programs, you will need to answer some questions about them.
Remember that neither problem is case sensitive, so transform words to lowercase
or uppercase. Also remember to use the StringTokenizer to find the correct
answers.
Part 1: Write a program that processes the FirstInputFile http://www.gutenberg.
org/cache/epub/100/pg100.txt and the SecondInputFile http://www.gutenberg.
org/files/3399/3399.txt. This program should count the number of words
with a specific amount of letters in these files - for example, the number of words
with 4 letters, 5 letters and so on. If one word is repeated 20 times in the text,
count it individually 20 times.
Part 2: Answer Questions 1-6.
Q1: How many words are there with length 10 in FirstInputFile?
Q2: How many words are there with length 4 in FirstInputFile?
Q3: What is the longest length between words and what is its frequency
in FirstInputFile?
Q4: How many words are there with length 2 in SecondInputFile?
Q5: How many words are there with length 5 in SecondInputFile?
Q6: What is the most frequent length and what is its frequency in SecondInputFile?
Part 3: Write a second program that again processes the FirstInputFile http:
//www.gutenberg.org/cache/epub/100/pg100.txt and the SecondInputFile
http://www.gutenberg.org/files/3399/3399.txt. However, in addition to
counting the number of words with a specific amount of letters, if one word is
repeated several times, count it only once. So, your output should be the frequency
of words with same length, but count a repeated word only once. Note:
You may need to use 2 MapReduce jobs.
Part 4: Answer Questions 7-12.
3COMP SCI 3306, COMP SCI 7306 Mining Big Data Semester 1, 2019
Q7: How many words are there with length 10 in FirstInputFile?
Q8: How many words are there with length 4 in FirstInputFile?
Q9: What is the most frequent length and what is its frequency in FirstInputFile?
Q10: How many words are there with length 5 in SecondInputFile?
Q11: How many words are there with length 2 in SecondInputFile?
Q12: What is the second-most frequent length and what is its frequency
in SecondInputFile?
Exercise 5 Summary of 2.4 and 2.5 (10 +10 points) (Postgraduate Students
(COMP SCI 7306) only)
For this exercise you have to read Section 2.3.9-2.3.11, 2.4, and 2.5 in Leskovec,
Rajara- man, Ullman (second edition, 2014).
Summarize the content of 2.4 in your own words (600 words).
Summarize the content of 2.5 in your own words (600 words).
3 Procedure for handing in the assignment
Work should be handed in using Canvas. The submission should include:
PDF file of your solutions for theoretical assignments.
all source files
descriptions as required in the statement of the exercises
Hadoop outputs for the exercises
a README.txt file containing instructions to run the code, the two group
members’ names, student numbers, and email addresses of the group members,
only one submission per group.
4